MODULO FIKE 55-045 DE MONITORAMENTO DE ALARME

Códigos do fabricante:
55-045

DESCRIPTION
The Mini Monitor Module, P/N 55-045 & 55-050, provides a single, Class B initiating device circuit (IDC)
capable of monitoring normally open contact fire alarm and supervisory devices or normally open
supervisory/process devices. In addition to monitoring the connected contacts, the module will monitor the
wiring to the device for open circuits via an end of line resistor (Class B only). The module has a single tricolor LED to indicate device status. The isolator version of the module, P/N 55-050, provides complete short
circuit isolation for installations requiring NFPA, Class X wiring.
The module is compatible with Fike?s CyberCat® and Cheetah® Xi intelligent control panels. Its operating
parameters are configured using the panel?s programming software and are stored within non-volatile RAM
in the module. This on-board intelligence allows each module to communicate its status directly to other
devices connected to the panel. This peer-to-peer digital protocol results in less information that needs to
be sent between the module and the host control panel, resulting in faster, more reliable communication.

SPECIFICATIONS
Normal Operating Voltage: 15 to 30 VDC
Standby Current: 485 µA max. (continuous broadcasts)
IDC Voltage: 5.4 VDC max.
Alarm Current: 2 mA (red LED on)
Maximum IDC Wiring Resistance: 100 O
Temperature Range: 32 to 120°F (0 to 49°C)
Humidity: 10 to 93% RH Noncondensing
Dimensions: 1.31? H x 2.73? W x 0.61? D
(33 mm H × 69 mm W × 15 mm D)
Wire Length: 6.5 inches (165 mm)
Accessories: 39 kO End of Line Resistor P/N 10-2625 included
Mounting: Inside standard electrical box behind monitored device